Service

Concrete Repair & Asset Protection Canberra

Remicon delivers concrete repair for Canberra strata, commercial and government buildings: spalling and concrete cancer remediation, crack injection, precast and façade repair, car park and balcony soffit works, and new concrete where replacement is the right answer. Structural engineering is coordinated where load-bearing elements are affected, and every repair is paired with protective coatings and a fix to the water source so the asset stays repaired. One licensed contractor from investigation to completion.

Concrete carries most of the load, most of the water and most of the risk in a Canberra apartment building or commercial structure. Slabs, soffits, beams, columns, balconies, precast panels, podiums, retaining walls and car parks all sit with the owners corporation or facility manager to maintain, and all of them deteriorate in Canberra's freeze-thaw climate faster than most committees expect.

Remicon delivers concrete repair and asset protection for strata, commercial and government buildings across Canberra as a licensed remedial builder. That covers the full range: spalling and concrete cancer remediation, crack repair, precast and façade rectification, new concrete where replacement is the right answer, and the protective systems that keep the structure sound after the repair. Where load-bearing elements are affected, we coordinate structural engineering consultation and work to the engineer's specification.

Concrete repair services in Canberra

  • Investigation: delamination survey, cover meter and carbonation testing, chloride sampling where relevant, and photographic mapping of affected areas
  • Spalling and concrete cancer repair: breakout to sound concrete, reinforcement cleaning and treatment, corrosion inhibitor, engineer-specified repair mortar, curing and finishing
  • Crack injection with epoxy or polyurethane resins for structural and leaking cracks
  • Car park soffit, beam, column and slab remediation with traffic management and staged access
  • Balcony edge, hob and soffit repair, integrated with waterproofing rectification above
  • Precast panel and façade concrete repair, including rust staining, panel joints and sealant replacement
  • Retaining wall repair, drainage correction and stabilisation
  • New concrete: slabs, hobs, kerbs, ramps, stairs, plinths and structural elements where replacement outperforms repair
  • Surface rectification: grinding, levelling, trafficable toppings and slip-resistant finishes on walkways and ramps
  • Protective coatings: anti-carbonation, waterproofing and trafficable systems
  • Cathodic protection and other corrosion control systems coordinated with specialist engineers for high-risk structures

Repair is half the job. Asset protection is the other half.

A repair restores the concrete where it has failed. It does nothing about the conditions that caused the failure or the adjacent concrete heading the same way. Asset protection means:

  • Fixing the water source: the balcony membrane, the podium drain, the failed sealant joint or the undersized gutter above the defect
  • Coating exposed concrete to slow carbonation and block moisture
  • Correcting drainage behind retaining walls and around slab edges
  • Programming inspections so the next area to deteriorate is found before it becomes a safety or structural issue

This is why Remicon delivers concrete works as part of a full remedial scope rather than as a standalone trade.

Structural safety and engineering on Canberra concrete works

  • Where works affect beams, columns, slab edges, balconies or retaining structures, Remicon coordinates structural engineering consultation before breakout or demolition begins
  • Repairs and new structural concrete are carried out to the engineer's specification with hold points and photographic evidence at each stage
  • Loose or falling concrete over car parks and walkways is made safe immediately, with permanent works scoped and quoted within 48 hours

Common concrete defects in Canberra buildings

  • Car park soffits with rust staining and drummy patches, often under leaking planter boxes or podiums
  • Balcony edge spalling on 1990s and 2000s apartment blocks where the membrane terminated short of the edge
  • Precast façade panels with exposed corners, cracked joints and failed sealant
  • Suspended walkway slabs on older townhouse complexes with cracking at supports
  • Retaining walls with efflorescence, spalling and lean from poor drainage behind
  • Cracked, heaved or sunken driveways, ramps and paths on reactive clay soils
  • Worn or delaminated trafficable surfaces on ramps and plant decks

Frequently asked questions

Do you do small concrete repairs or only large projects? Both. A single spalled soffit, a cracked walkway slab or a new hob is as routine for us as a full car park remediation program. Every job is scoped from an inspection and quoted within 48 hours.

Is concrete cancer dangerous? Falling concrete is a public safety risk and progressive corrosion reduces structural capacity. Early-stage spalling is routine to repair. Left for years, it becomes a structural engineering problem with a very different cost.

Do you need an engineer? For non-structural repairs and surface works, no. For structural elements, new structural concrete or widespread deterioration, yes, and we coordinate that consultation as part of the scope.

Can you work in an operating car park or occupied building? Yes. Works are staged with traffic management, bay closures and resident notification coordinated through the strata or facility manager.

Get your concrete assessed in Canberra

Contact Remicon for a concrete condition inspection. Defects mapped, made safe where required and quoted within 48 hours.

Our expertise in numbers
20+
Years of combined remediation experience.

Specialists in remedial, strata, and asset protection works.

250+
Projects delivered by our leadership & team.

Across remedial repairs, waterproofing, façade works, and maintenance.

90+
Skilled trusted trade & professional partners.

A reliable network supporting quality, safety, and compliance.

100%
Customer and client satisfaction rate

Delivering results beyond expectations.

A trusted partner for engineered remediation and long-term building protection.

We bring a structured approach to every remedial project, clear communication, detailed inspections, and traceable documentation from start to finish.

Whether resolving waterproofing failures, repairing concrete, or restoring building façades, our team ensures each outcome is durable, compliant, and aligned with your long-term asset needs.

Why choose Remicon?

Why Remicon is Canberra’s leading choice in building remediations.

01

Full Scope Service

We combine skilled trades, quality materials, and disciplined processes to ensure long-lasting and precise remedial outcomes.

02

Start to Finish

Our process ensures you receive consistent updates, structured documentation, and solutions shaped around your requirements.

03

Digital Transparency

Photo reports, progress updates and documentation delivered digitally as work happens. Strata managers and committees see exactly what was done, when, and why.

04

Warranty & Assurance

Written warranties on workmanship, backed by manufacturer warranties on approved systems. If a repair fails within the warranty period, we come back and fix it.

05

Compliance Management

From investigation to completion, we manage the full remedial process with consistent documentation and quality control.

06

Preventative Focus

Fixing the cause, not just the symptom, saves owners corporations money over the long term.

07

48 Hour Quotes

Site inspection to written quote within 48 hours. Clear scope, clear pricing, no chasing us for a response.

08

Occupied-Building Specialists

We plan remedial works around residents and tenants, coordinating access, staging, and communication so projects are delivered with minimal disruption to daily life.

09

Safety First Approach

Our teams arrive with WHS documentation, site-specific risk assessments, and trained supervision so remedial works are completed safely, with minimal disruption to occupants.

FAQ

Customers frequently ask

How quickly will we get a quote?
Who do we deal with during the project?
Can works be staged to suit our budget or sinking fund?
What documentation do we receive?
Are your trades licensed and insured?
How do you work in occupied buildings?
Will Remicon present to our committee or AGM?
Do you fix the cause or just the damage?
Let's discuss your project!

Keen to chat about your project? Reach to our construction specialists for a quick and detailed inspection and quote.

Remicon Canberra Remedial Builders Client Engagement
20+
Combined Years of Experience